Remote Control - Samsung LN-R269D Owner's Instructions Manual

G I
E N E R A L N F O R M AT I O N

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV. When using the
remote, always point it directly at the TV. You can also use your remote control to operate
your VCR, Cable box, DVD player, or Set-Top Box.
POWER
Turns the TV on and off. (See page 19)
ANTENNA
Press to select "AIR" or "CABLE". (See pages 8~11)
GUIDE
Press to display the on-screen Electronic Program Guide (EPG).
(See page 104)
-
Press to select additional channels (digital and analog) being
broadcast by the same station. For example, to select channel
"54-3", press "54", then press "-" and "3".
MUTE
Press to temporarily cut off the sound. (See page 19)
MENU
Displays the main on-screen menu. (See page 20)
MODE
Selects a target device to be controlled by the Samsung
remote control (TV, VCR, CATV, DVD, STB).
(See pages 29~31)
NUMERIC BUTTONS
Press to change the channel.
PRE-CH
Turns to the previous channel. (See page 19)
CH and CH
Press to change channels. (See page 19)
VOL + and VOL -
Press to increase or decrease the volume. (See page 19)
SOURCE
Press to display all of the available video sources.
UP / DOWN / LEFT / RIGHT / ENTER
Use to select on-screen menu items and change menu values.
FAV.CH
Press to switch to your favorite channels. (See page 62)
MTS
Press to choose stereo, mono or Separate Audio Program
(SAP broadcast). (See pages 55~56)
PIP
Picture-in Picture ON/OFF. (See page 44)
CH.LIST
Displays the channel list. (See page 64)
5
English-
(Channel UP/Down)