Table of Contents
Advertisement
EN3-PD22SO.qxd
12/14/02 7:02 AM
Adjusting the Screen Quality
Changing the Screen Position
English-36
Page 36
The propose of picture quality adjustment is to remote or reduce
picture noise. If the noise is not removed by fine tuning alone, then
do the frequency adjustments to the utmost and fine tune again.
After the noise has been reduced, re-adjust the picture so that it is
aligned on the center of screen.
Preset to the PC/DVI mode by using the PC button.
1
Press the MENU button.
Result:
The main menu is displayed.
2
UP/DOWN
Press the
LEFT/RIGHT
Press the
Result:
The options available in the PC/DVI group
are displayed.
3
UP/DOWN
Press the
4
Press the LEFT/RIGHT
vertical stripes appears or the picture may be blurry.
5
When you are satisfied with the settings, press the MENU button
repeatedly to return to normal viewing.
Coarse and Fine don't work in DVI-Digital Mode.
Preset to the PC/DVI mode by using the PC button.
1
Press the MENU button.
Result:
The main menu is displayed.
2
Press the UP/DOWN
Press the LEFT/RIGHT
Result:
The options available in the PC/DVI group
are displayed.
3
UP/DOWN
Press the
the
H-Position
4
Press the LEFT/RIGHT
5
Press the MENU button repeatedly to return to nomal viewing.
To initialize the image adjustment.
1
After steps 1~2 above are completed, press the UP/DOWN
button to select the
2
Press the LEFT/RIGHT
button to select the
PC/DVI
button
.
button to select the
Coarse
button to adjust the screen quality,
button to select PC/DVI.
button.
button to select the
Position
or
.
V-Position
button to adjust the required position.
.
Image Recall
button to initialize the imag adjustment.
.
or
Fine
.
and select
Advertisement
Table of Contents
