End Recordings; Ending A Recording Automatically; Ending A Recording At The Live Position; Ending A Recording At The Actual Position In The Time Shift Buffer - Philips DVDR 725H/05 Operating Instructions Manual

Recording on the HDD

End recordings

Ending a recording automatically

Recordings will be automatically ended if data from the GUIDE Plus+
is available or if you entered the end while starting a recording
(30-minute steps).

Ending a recording at the live position

1 If necessary, switch the TV to the programme number (input
socket) of the DVD recorder.
2 Press STOP h
N
.
P
A message appears on the screen, asking whether you really
want to end the recording.
If you want to end the recording, select 'Yes' with D
O
L
confirm with OK

Recordings from the Time Shift Buffer

As a rule, recordings in the time shift buffer are automatically deleted
after a certain time (1 to 6 hours). In order to store recordings on the
HDD permanently, you can mark sections of the Time Shift Buffer that
will not be deleted and will be available as titles for later playback.

Mark an entire title

A title marker is set if you are watching a TV show longer than 60
seconds (No change of programme number within 60 seconds).
If you want to mark an entire title (title marker at the beginning and at
the end), proceed as follows:
1 Press INFO
C
to display the bar of the Time Shift Buffer on the
screen.
O
You can also press the yellow colour button
overview of the recordings.
2 Select the title you want to store with B
3 Press REC/OTR n
1
to mark the title.
P
The colour within the bar changes to red.
55
.
F
to get a better
, A
O I
.
O
If you do not want to end the recording, confirm 'No' using
L
OK
.
®
Ending a recording at the actual position in
the Time Shift Buffer
With STOP h
N
actual position (current time).
If you want to end a recording earlier proceed as follows:
1 Jump back in the Time Shift Buffer using D
2 Press INFO
3 Hold down the red function button
K
and
O
To remove the marker, press the red function button
D
when the bar is visible. The red title marker disappears.
4 If you want to mark other titles, repeat steps
you have selected all the titles you want.
O
If you want to mark several titles in a sequence, go to the
oldest title and press REC/OTR n
Using REC/OTR n
O
title (actual TV-show is not over yet) You will see this in the
red marked 'O' symbol on the right end of the Time Shift
Buffer bar.
The recording will be stoped automatically at the end of the
program.
If the start (titlemarker) of the TV-Show was not taken from
the GUIDE Plus+
available, you can extend the end by +30, +60, +90 ,... minutes
using REC/OTR n

Mark part of a title

You can also mark only parts of a title.
If you mark several parts of a title, each part will be stored as a
separate title on the HDD.
1 Press INFO
screen.
O
You can also press the yellow colour button
better overview of the recordings.
2 Select the title you want to store with B
you will always end the current recording at the
C
to display the time bar.
D
.
1
1
you can also mark the future end of a
system, or no GUIDE Plus+
®
1
.
C
to display the bar of the Time Shift Buffer on the
O
K
.
2 3
and , until
several times.
information is
®
F
to get a
, A I
.