Philips DVDR 725H/05 Operating Instructions Manual page 108

Before you call an engineer
PROBLEM/HINTS
Hidden scenes on a
DVD+RW are still
visible on my
DVD Player
Other disc errors
(DVD+RW)
Other disc errors
(DVD+R), 'Disc
contains unknown
data' interruption of a
recording (power
outage)
The index screen
flickers when a DVD+R
is inserted
If I switch on a device,
connected to the
EXT2
AUX-I/O
socket, the
M
DVD Recorder starts a
recording.
103
SOLUTION
b
If a DVD+RW was edited with the 'Edit' function (button EDIT
compatible' should be used. Otherwise the old titles and also the 'hidden scenes' are still visible.
To modify the DVD+RW proceed as follows:
1
Insert the DVD+RW you want to prepare.
B
2
Press DISC MENU
Select the first title using A
3
Press A I
4
.
Press C and select 'Make edits compatible' using A
5 M
L
OK .
6 L
Press OK to start the process.
7
When the process is complete, the index screen appears.
b
If it is impossible to play back a disc, you can try and repair it for new recordings using the following function.
This will only prepare the disc for erasing. It will not be erased, however, until the recording has been
completed.
1
Clean the disc
2 Open the disc tray with OPEN/CLOSE J
3
Hold down the red function button
prepared for erasing.
4
Start recording as with an empty disc.
b
This message may appear if you instert a DVD+R that was not finalised or an error occurs during the
recording. DVD+R's that have not been finalised are very sensitive to fingerprints, dust, or dirt. This may
cause problems during recording.
To use the disc again, follow the next steps
1
Make sure that the surface of the disc is clean.
Open the disc tray with OPEN/CLOSE J
2
the tray.
3
Hold down 5 on the remote control until the tray closes. The disc will be read ('READING'
appears on the display) and the DVD recorder will start the repair process. This may take up
to four times as much time as the recording, in which the error occurred.
4
If the disc is recovered, the index screen will appear.
Please observe the following:
The recovering procedure is successfully only if there was a previous recording on the disc.
Error during recording: The title may be missing.
Error while changing the title/index picture: The original title/index picture may be visible.
Error while finalising: The disc appears not to have been finalised.
b
You can finalise the disc using the following function:
1 Open the disc tray with OPEN/CLOSE J
the tray.
2
Hold down 4 on the remote control until the tray closes.
'FINALIZING' appears in the display. Finalising begins. This may take up to three minutes.
3
If finalising has been successful, the index screen will appear.
b
The function 'Automatic Satellite Recording' is switched on.
If the DVD-Recorder is switched off, the symbol 'SAT' appears in the bottom left corner of the display.
If the DVD-Recorder is switched on, instead of the clock, '__:__' appears with a red background in the
'Tuner-Info-Field' (bottom left corner of the screen)
To switch off the function proceed as follows:
1
Press BROWSER HDD
2 Select 'Preferences' with B
Press C
3 M
to select 'Recording'.
Select 'Sat record' (second menu page) using B
4
Select 'Off' using C
5 M
6
End with SYSTEM MENU
6
to call up the index screen.
or the STOP h
I N
button.
3
. Insert the disc but do not close the tray.
D
on the remote control until the tray closes. The disc is
3
. Insert the defect DVD+R but do not close
3
. Insert the defect DVD+R but do not close
H
and then SYSTEM MENU
O
.
O
.
A
.
) the function 'Make edits
or B
I O
and confirm with
A
.
.