The 'Editor' Screen; The 'Setup' Screen - Philips DVDR 725H/05 Operating Instructions Manual

The GUIDE Plus+® System

The 'Editor' screen

Here you can allocate the programme numbers to the corresponding
TV channels and switch them on/off for the programme listings ('Grid'
screen). Moreover, you can define the use of the TV channels on the
external receiver.
1 Press B
O
.
2 Select the TV channel you want to change using B
Use the D K and C
O
left tile
This tile contains the TV channels with their short descriptions and
indicates whether the TV channel is displayed in the programme listing
('Grid' screen) or not.
O
You can switch on/off a TV channel for the 'Grid' screen using
the red function button
Do not switch off the channel which transmitts the

The 'Setup' screen

Here you can make or change the basic settings such as language,
country, external receiver. Moreover, you can watch an automatic
demonstration of the GUIDE Plus+
37
Home
Editor displays your TV channel settings. You may
switch channel On or Off (grey), select their Source
and their programme number. Press Bto use. Press
Dfor Info. Press Cfor Setup.
Search Schedule Info Editor
Name On/Off Source Programme N.
BBC1 On TV P 001
BBC2 On TV P 002
ITV On TV P 003
CH4 On TV P 004
O , A
M
buttons to switch between tiles.
D
.
Home
Setup your system to receive GUIDE Plus+ data.
Schedule Info Editor Setup
Setup
View Demo
® system.
GUIDE Plus+
in section 'General information'.
right tile
This tile contains the TV channel properties and the programme
numbers. You can modify channel allocation or assign an external
receiver. In order to assign a receiver, it must be already installed in
the GUIDE Plus+ ® system.
To change allocations, proceed as follows:
1 Select the TV channel you want to change using B
2 Press the green function button
3 Enter the programme number of the TV channel using the number
buttons 0..9 . You can only enter programme numbers of TV
channels that have already been installed.
Entering the TV-channel of an external receiver
- Select the TV channel you want to watch only through the external
receiver using B
- Choose the corresponding source using the red function button
This function button is only available when at least one external
I
.
receiver has been installed. Read section 'Setting up the GUIDE Plus+
system' on how to install an external receiver.
- Press the green function button
the TV channel which you would also enter for this TV channel on the
external receiver.
Please observe that in the case of modified TV channels, the transfer of
GUIDE Plus+ ® channel data may take up to 24 hours.
'Setup'
All the settings you have already made are displayed here. Select the
desired line using B
more information on the settings, read section 'Setting up the GUIDE
Plus+ ® system' in chapter 'The GUIDE Plus+
'View Demo'
Here you can view a demonstration of the different functions of the
GUIDE Plus+ ® system.
Start the automatic presentation with OK
If you start the demonstration, programmed recordings may be
deleted.
If you cancel the presentation by pressing OK
to the setup menu.
® data. You find the channel in the table
E
.
O , A I
.
E
. Enter the programme number of
or A
O I
and confirm with OK
® system'.
L
.
L
, you will go directly
, A
O I
.
D
.
®
L
. For