Philips HQ8894 Instructions Manual page 11

C
3
Make sure the inside of the shaving unit and the
hair chamber have been cleaned properly.
4
5
Never dry the shaving unit with a towel or tissue
as this may damage the shaving heads.
C
6
You can also clean the hair chamber without
water by using the brush supplied.
Every six months: shaving heads
C
1
2
1
2
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
Clean the shaving unit and the hair
chamber by rinsing them under a hot tap
for some time.
Rinse the outside of the appliance.
Close the shaving unit and shake off excess
water.
Open the shaving unit again and leave it
open to let the appliance dry completely.
Open the shaving unit, turn the wheel
anticlockwise (1) and remove the retaining
frame (2).
Clean the cutters and guards with the
brush supplied.
ENGLISH
13