Storing Stations Manually - Kenwood VR-4900 Connection And Setup Manual

Chapter Two : Setting Up PowerTouch
3. Touch at the top of the screen:
4. Touch .
5. Confirm the station name list and touch
OK. If you do not want to finalize, touch
the previous screen. .
The station name are written in the preset channel list.

Storing Stations Manually

1. Touch (music) on the Quick access menu to access
the Music menu.
2. Touch on the Music menu to access the Tuner
controls.
3. Touch to choose the receiving band.
4. Touch to switch between Auto tuning and Manual
tuning. Select Manual if you experience interference due
to weak radio signals.
if it is
5. Choose the station you want to store using one of the
following methods:
to return to
• Touch or
quency appears.
• Touch and enter the broadcast frequency
using the 10key pad. (e.g.; To select FM 87.5 MHz,
enter 8, 7, 5, 0, and
6. Touch Memo button at the top of the screen:
7. Touch a storage button. Use
storage buttons.
If you choose a storage button that already has a station
assigned, the new station will replace the previously-
stored station.
8. (Optional) Touch
in the Preset Memory menu:
until the station's broadcast fre-
• Use the stylus to select characters from the keyboard.
• Touch
again to access special characters (such as @, !, &, etc.).
Touch it a third time to return to uppercase characters.
• Touch
)
characters.
• Touch
entered. Touch
line.
• Touch
9. Touch
turn to the Tuner controls.
10. Repeat steps 3 through 9 for each station you want to store.
Touch
menu, then touch
the basic Music menu.
or to access more
to enter a name for the station
to access to lowercase characters. Touch it
or to move back and forth between the
(backspace) to clear the last character you
to delete all the characters in the
to save your title.
to tune to the newly saved station and re-
(check icon) to return to the TUNER control
(check icon) again to return to
41