Setting Up The Powertouch - Kenwood VR-4900 Connection And Setup Manual

Chapter Four: Setting Up Multiple Rooms
You can operate equipment from two different rooms us-
ing your Kenwood PowerTouch. To do so:
1. Make sure you have identified all the connected devices
to your PowerTouch. For more information on identi-
fying devices, see "Identifying Devices For PowerTouch
Control" on page 37 of this manual.
2. Touch the (setup) on the Quick access menu to ac-
cess the Setup menu.
3. Touch to access multi-room commands:

Setting Up the PowerTouch

4. Touch the to highlight it.
5. Room A and Room B can be alternated each time the
( ) button is pressed. The but-
ton inverted in black is the currently controllable but-
ton.
Your PowerTouch is now set up to operate devices in
multiple rooms. Which room it controls depends on
which room you select. For more information on se-
lecting rooms, see "How Do I Switch Control Modes?"
on page 86 of the Users' Guide.
47