Yamaha DSP-E800 Service Manual page 10

DSP-E800
2. BEGINNING AND CANCELLATION
(1) Up the function and the display
Up sub-menu No.1 of the diagnosis main is selected.
A. How to start the diagnostic program
Use the front panel keys of the main unit
Plug in the AC power cord. With the Power OFF, hold down the "PROGRAM
simultaneously (Step 1), then press the "STANDBY/ON" key (Step 2).
Sub menu No. 1 of the diagnosis main menu No. 1 will start.
"STANDBY/ON" key
Step2. Press the "STANDBY/ON" key.
B. Settings for start-up of diagnostic program
The settings used when starting the diagnostic program are as follows.
1. EFFECT LEVEL
CHANNEL
LEVEL (dB)
2. MUTING
3. INPUT (VIDEO)
4.
CENTER SPEAKER
5.
REAR SPEAKER
6. MAIN SPEAKER
7. LFE/BASS OUT
C. Start-up display
The protection history information appears on the front panel display.
7
FRONT PANEL
Step1. Hold down the "PROGRAM
and "EFFECT" key simultaneously.
:
CENTER R SUR L SUR
0 0 0
: OFF
: DVD/LD (DVD/LD)
: LARGE
: LARGE
: LARGE
: SWFR
"PROGRAM
"EFFECT" key
"
SWFR
0
" and "EFFECT" keys
" key