Troubleshooting - Samsung VACUUM CLEANER Operating Instructions Manual

USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right
position for the type of surface to be cleaned.
Select the carpet indicator
Select flat surface indicator
FOR UNIVERSAL BRUSH
NOTE :
Use the floor nozzle for all cleaning surfaces. For optimum efficiency, clean floor brush with crevice tool.
TROUBLE SHOOTING
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully. Check that the cord is not
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
when cleaning carpets..
when cleaning the floors, tiles, etc.
CAUSE
No power supply.
Filter, nozzle, suction hose Remove the object.
or tube is blocked.
twisted or wound unevenly. push down the cord rewind
EN-7
REMEDY
Check cable, plug and
socket.
Pull the cord out 2~3m &
button.
DJ68-00186L REV ( 0.0 )