Table of Contents
Advertisement
User Guide
ICE D-20 Wireless Broadband Gateway
2.4 Introduction to Program Startup
2.4.1 Starting the Program
After starting D-20, open the Web browser on a PC connected to D-20. Enter
http://192.168.1.1 (the default address of D-20 wireless broadband gateway) in the
address bar of the browser and then press the Enter key to display the WIRELESS
BROADBAND GATEWAY LOGIN page of D-20. Users can choose different user IDs
to log in. Figure 2-7 shows the login page.
Figure 2-7 The login of the Web administrator
D-20 supports two types of users to log in.
Admin account: The administrator can view and change the configurations.
User account: The common users can only view the basic information.
Note:
To avoid configurations confliction, only one host can log in to the Web configuration
page of D-20 at the same time.
If you change the default device address 192.168.1.1 when configuring D-20, you
need to enter the new device address when logging in to the gateway configuration
page.
2.4.2 Introduction to the Configuration Page
I. The Configuration Page
After logging in as the administrator, you can see the configuration page of D-20. See
Figure 2-8.
Huawei Technologies Proprietary
2-7
Table of Contents
- Quick Links:
- Introduction
- Configuring Device
Hide quick links:
Advertisement
Table of Contents
