Table of Contents
Advertisement
User Guide
ICE D-20 Wireless Broadband Gateway
III. Restoring the Default Settings
The steps of restoring the factory setting are shown as follows.
1)
Select Advanced in the operation navigation area.
2)
Select Admin in the operation navigation area.
3)
Select Restore defaults in the operation navigation area and then click Restore
to restore the default settings. See Figure 3-15.
Figure 3-15 Restoring the default settings
Note:
After setting D-20 to default settings, you need to re-set the parameters of D-20.
IV. Rebooting D-20
The steps of rebooting D-20 are shown as follows.
1)
Select Advanced in the operation navigation area.
2)
Select Admin in the operation navigation area.
3)
Select Reboot in the operation navigation area and then click Reboot to reboot
D-20. See Figure 3-16.
Huawei Technologies Proprietary
3-15
Table of Contents
- Quick Links:
- Introduction
- Configuring Device
Hide quick links:
Advertisement
Table of Contents
