Huawei ICE D-20 EC506 User Manual page 25

User Guide
ICE D-20 Wireless Broadband Gateway
Figure 3-7 WLAN Security Setting
II. WLAN Security Parameter Description
Wireless Interface: The SSID and MAC address of D-20, which is used for
identifying D-20. It is not necessary for the user to enter the parameter manually
and the system fills it in automatically.
802.11 Authentication: Two options are available, Open and Shared, which are
corresponding to two types of authentication for user's visit defined in the IEEE
802.11 standard. By default it is Open.
WPA-PSK: To enable or disable the management function of the WPA pre-shared
key.
WPA2-PSK: To enable or disable the management function of the WPA2
pre-shared key.
WPA Encryption: To set WPA encryption mode. Three modes are available:
TKIP, AES, and TKIP+AES.
WPA Pre-Shared Key: To set WPA pre-shared key.
Network Key Rotation Interval: To set the interval of the dynamic change of the
key. By default, it is 0 s. By setting to 0 or vacant, you can disable this function.
WEP Encryption: To enable or disable WEP data encryption. Two conditions are
required: Enabled is selected and an available key is set.
Huawei Technologies Proprietary
3-7
Table of Contents