Aqua Medic Mistral 200 Operation Manual

Membrane air pump

Hide thumbs Also See for Mistral 200:

Download this manual

aquarium membrane air pump with a maximum capacity of 380 l/h(95 gph) (Mistral

300) or 300 l (80 gph), (Mistral 200)

In purchasing this unit you have selected a top quality product. It has been specifically

designed for aquarium use and has been tested by experts. This unit will efficiently meet the

air supply requirements of most types of aquarium.

Operation Manual for the

Mistral 200

Mistral 300

membrane air pump

Need help?

Do you have a question about the Mistral 200 and is the answer not in the manual?

Page 1 380 l/h(95 gph) (Mistral 300) or 300 l (80 gph), (Mistral 200) In purchasing this unit you have selected a top quality product. It has been specifically designed for aquarium use and has been tested by experts. This unit will efficiently meet the...
Page 2: Technical Data
This is undertaken with a slide control, which adjusts the magnetic circuit and not the air pressure. The Mistral 200 has a fix output. The housing is made from cast aluminium and this, combined with the magnetic control system and the vibration reducing rubber feet, results in exceptionally quiet operation.
Page 3 3.Connections The pump is connected to the equipment it supplies with aquarium air line (1/4”, 4/6 mm). If ozone is to be used, ozone resistant tubing (e.g. silicone) must be used after the ozoniser. 4. Installation The pump should be positioned in a dry place. Care should be taken to ensure that water cannot enter the pump when, for instance, it is switched off for aquarium maintenance or during a power failure.
Page 4 5. Maintenance/Cleaning The pump is constructed for long-term low maintenance operation. The only item requiring regular attention is the air filter. The air filter is positioned at the top of the pump. This cotton filter has to be changed at regular intervals dependant on the quality of the ambient air. To change the filter, undo the securing screw, remove the plastic cap, remove the contaminated filter pad, fit a genuine replacement and replace the cap, finally...

Mistral 300