Troubleshooting; No Steam From Steam Wand; No Water From Hot Water Wand - Quick MILL Alexia Owner's Manual

Troubleshooting

No Steam From Steam Wand


Make sure the machine has been turned on for at least 15 minutes with the power
switch in the "II" heating position and the steam switch in the on position.

Check the steam tip for a blockage. Clean steam tip holes with a paper clip.

Check the steam wand for a blockage by unscrewing the steam tip from the wand.
Check the inside of the steam tip for dried up milk and then also check the wand for
dried up milk inside.

Refer to the "Not

No Water From Hot Water Wand


Make sure the machine has been turned on for at least 15 minutes with the power
switch in the "II" heating position and the steam switch in the on position. The pump
switch also must be on for hot water.

Check the steam tip for a blockage. Clean steam tip holes with a paper clip.

Check the steam wand for a blockage by unscrewing the steam tip from the wand.
Check the inside of the steam tip for dried up milk and then also check the wand for
dried up milk inside.

Refer to the "Not
Alexia Espresso Machine
Heating" section of the troubleshooting manual.
Heating" section of the troubleshooting manual.
18