Ferguson F1915LVD Instruction Manual page 33

TROUBLESHOOTING GUIDE
SyMPtOM CaUSe (aNd ReMedy)
tV
Bad Picture (snow,
multiple images,
distortion, blurry)
Black and white
picture.
N o p i c t u r e o r
sound.
F u n c t i o n k e y
does not respond
correctly.
No pic ture or
sound from the
HDMI source.
F1915LVD & F2215LVD_IB_FRG_050.indd 33
• Check the location of the antenna and adjust it if necessary.
• Make sure the antenna cable is firmly connected.
• Make sure all input cables are firmly connected.
• Check the PICTURE MENU within the ANALOGUE TV/DTV SETUP.
• Check to make sure the program you are watching is broadcast in Colour
and not Black & White.
• Make sure the unit is plugged in and turned on.
• Make sure TV mode is selected.
• Try a new channel to check for possible station trouble.
• Make sure the antenna is connected properly.
• Increase the volume.
• Make sure the antenna or audio video source device is working properly.
• Make sure all cables are firmly connected.
• Check for local interference.
• Under the influence of electrostatic phenomenon, the product may
malfunction and require user to power reset.
• Unplug and re-plug the AC power cord.
• Check the connection between this unit and the HDMI out jack of other
equipment.
• Try setting the other HDMI equipment to a different video output resolution
such as 480p, 576p, 720p, 1080i or 1080p and to audio output type 'PCM'.
To do this you may need to watch the picture from the source equipment
with the scart or AV input of the TV, or on another TV.
• Replace the HDMI cable with a better one. Bad HDMI cable or very long
cable (>2m) can cause data lost.
33
1/11/2011 10:21:43