Maintenance; Specification - Ferguson F1915LVD Instruction Manual

MAINTENANCE

CLeaNING tHe dISC
A defective or dirty disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface of the disc.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning
cloth.
• NEVER use solvents such as benzene or alcohol to clean the disc.
• Do NOT use irregular shape discs (example : heart shaped, octagonal, etc.). They may cause malfunctions.
CLeaNING tHe UNIt
• Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth which has been
dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe it with a dry cloth.
• Never use alcohol, benzine, paint-thinner, cleaning fluid or other chemicals. Do NOT use compressed air to
remove dust.
IMPORtaNt NOte
Before shipping the unit, remove any disc from the disc compartment.

SPECIFICATION

Operation Voltage
Region Code
design and specifications are subject to change without notice.
F1915LVD & F2215LVD_IB_FRG_050.indd 31
AC230V~50Hz
2
31
1/11/2011 10:21:42