Troubleshooting Guide - Ferguson F1915LVD Instruction Manual

TROUBLESHOOTING GUIDE

SyMPtOM CaUSe (aNd ReMedy)
No power. • Check that the AC power cord is connected.
• The unit is not turned on.
The remote does • Remove any obstacles between the remote and the unit.
not function. • Use the remote near the unit.
• Point the remote at the remote sensor on the unit.
• Replace the batteries in the remote with new ones.
dVd
• Make sure that you select DVD mode.
No sound or only
• The system is in pause mode. Press the
a very low-level
sound is heard.
• Fast-forward or fast-reverse is performed. Press the
• Make sure the AV IN input connections is correct.
• The unit is too hot, shut off the unit for 30 minutes to cool it down.
No picture. • The region number of the disc doesn't match the region number of this
Th e p i c t u r e i s
• Clean the disc.
breaking up.
• The disc is scratched.
S e ve r e h u m o r • The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with
noise is heard.
• Clean the disc.
The disc does not • There is no disc inside ("No Disc" appears on the screen).
play. • Insert the disc correctly with the playback side facing frontwards.
• Clean the disc.
• A non-valid disc has been inserted. The unit and disc region number are
• Condensation may have formed inside the unit due to a sudden change in
tV
• It happens sometimes, if you have a weak signal. Usually it just means
Why have I lost
some/all of my
channels?
Why do I get • In most cases, blocking is caused by a reception problem - either the signal
'blocking' on my
digital picture?
• If you are installing a new aerial, we recommend a wideband rooftop aerial
What type of
aerial do I need?
F1915LVD & F2215LVD_IB_FRG_050.indd 32
PLAY mode.
to normal play mode.
unit.
alcohol.
incompatible.
temperature. Wait about an hour for it to clear and try again.
you'll need to rescan your digital box or TV. Don't worry, it easy to do. And
once you've done it, you should get all the Freeview channels available to
you. If problems persist you may need to get your aerial checked. Talk to
your retailer or contact your local aerial installer.
is too weak or there is some kind of interference. Talk to your retailer or
contact your local aerial installer
rather than a loft aerial. Loft aerials generally receive a weaker digital signal
and are more likely to get interference from other electrical equipment in
the home. We suggest you have an aerial survey done before getting an
aerial upgrade.
Talk to your retailer or contact your local aerial installer.
PLay button to return to normal
32
PLay button to return
1/11/2011 10:21:43