Connecting A Tv Antenna; Connecting A Power Cord - Ferguson F1915LVD Instruction Manual

CONNECTING A TV ANTENNA

CONNeCtING a tV aNteNNa/CaBLe/SateLLIte
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- RF output of a cable system
- RF output of a satellite system
Note:
For receiving over-the-air TV broadcasts, we recommend that you use an external fixed antenna.
Should you require the use of a temporary antenna, please ensure that you purchase an antenna with
sufficient ability to receive in weak signal areas. Only when you are in close proximity to a transmitter
will a temporary antenna reproduce a signal as strongly as a fixed antenna.

CONNECTING A POWER CORD

• Connect the AC power cord into a wall outlet.
• Press the / I button on the unit or remote control
to turn the TV on.
Note:
• Be sure the AC power cord is disconnected and the
TV is switched off before making connections.
• Make sure that all the components are connected
correctly.
• When you are not going to use the unit for a long
period of time, disconnect the power cord.
• The mains plug is used as the disconnecting device.
It should remain readily accessible and should
not be obstructed during use. To be completely
disconnected from the supply mains, the mains
plug of the TV should be disconnected from the
mains socket outlet completely.
F1915LVD & F2215LVD_IB_FRG_050.indd 13
Satellite / Cable Rf Out or
tV antenna cable to
tV aeRIaL CaBLe terminal
(cable not included)
TV
AERIAL
to wall
outlet
13
1/11/2011 10:21:37