Connecting A High-Definition (Hd) Source (Yuv); Using Headphones - Ferguson F1915LVD Instruction Manual

CONNECTIONS

CONNeCtING a HIGH-defINItION (Hd) SOURCe (yUV)

High-Definition (HD) Devices with component video output must be connected to the YUV input.
Connect the component video cable and audio cable (not included) as shown.
Make sure you connect the YUV Scart adaptor to this unit, then connect component video cable and
audio cable from the other equipment (COMPONeNt VIdeO OUt and aUdIO OUt) to this unit
(SCaRt and aUdIO IN).
To operate the connected device and play the source, first press the fUNCtION button to select the
YUV/SCART mode.
COMPONENT
VIDEO OUT
* May require a subscription for receiving
HD channels. Check with your cable/
satellite service provider for details.
Note:
When connecting a DVD player to the television, the picture resolution is dependent upon the
resolution of both the DVD player and the TV. For best results, select the highest resolution of the
DVD up to the TV maximum of 1080i.

USING HeadPHONeS

• Turn down the volume before connecting headphones
to the unit, then adjust the volume to your desired
level.
• When headphones are connected, no sound will
come from the front speakers.
Maximum output
voltage ≤150mV
CaUtION:
Excessive sound pressure from earphones and
headphones can cause hearing loss.
F1915LVD & F2215LVD_IB_FRG_050.indd 22
To
jacks
To AUDIO
OUT jacks
To AUDIO
IN jacks
To SCART jacks
YUV SCART adaptor
(included)
earphones /
Headphones
(1/8" [3.5mm]
diameter plug)
22
1/11/2011 10:21:40