Slideshow From The Selected Folder; Copying Files; Deleting Files - ZOpid HF-ZW104B User Manual

SLIDESHOW FROM THE SELECTED FOLDER


Start file management

Highlight and select a folder (such as MEM\Jpeg)

Enter Slideshow Mode（displays photos\music files in the directory
MEM:\Jpeg only and not from the subdirectories）.
NOTE: If slideshow is not started from File Management, then the frame displays
all the photos\music files on the selected memory card or built-in memory.
COPYING FILES (From memory card to built-in memory)

Select the memory card

Enter Photo Preview Mode (Press EXIT key to stop Slideshow), Music Mode,
Video Mode or File Management

Press MENU / SETUP button to display Copy File Menu

Select copy, and then the current files or directory could be copied to built-in
memory

DELETING FILES

To delete multiple pictures from the frame's built-in memory or memory cards, connect the
frame to your computer and when it's recognized as a removable disk, just use the normal
method you would use to add and delete files on your hard-drive.
If you have a PC, use Windows Explorer and if you have a Mac, use Finder to open the
removable drive to add and delete pictures.
NOTE: The following methods apply to pictures on the Built-in Memory ONLY
You can delete one picture/folder at a time from the Built-in-memory (not from the memory
card inserted in one of the frame's card slot) by using the remote control.
One way to delete pictures individually is as follows:
Make sure Built-in-memory is selected.
If you are in slide-show mode press EXIT key on the REMOTE until you see six thumbnail
pictures on the frame (as shown below)
Select the picture you want to delete using arrow button on the REMOTE
- 15 -