DIGITAL PHOTO ORNAMENT
GINGERBREAD MAN USER MANUAL
The pictures, diagrams, and certain functions
described in this manual may differ from the
actual product due to different models
Visit www.hittusa.com for a revised user manual
or troubleshooting tips
Rev. GBM-RGB-19/07 10 GT-21619-2
We express our sincere thanks for purchasing this Digital
Photo Ornament (DPO)!
Before operating this DPO, be sure to read this user
manual carefully. After reading it, please keep it in a safe
place for future reference.
HF-Z015GM
We reserve the right to make changes to this DPO,
Software and/or this User Manual without notice. Please
visit our support website www.hittusa.com for additional
product information and/or updates.
NOTE: The pictures, diagrams and certain functions
described in this manual may differ from the actual product
due to different models.
Before operating this DPO, please read the following
precautions carefully:
• Do not operate this DPO in extremely cold, hot, dusty
or damp environment
• Avoid putting this DPO under direct sunlight
• Do not scrub this DPO with a hard thing; it may result
in scratches on the screen and/or damage to the
hardware
• Keep this DPO and all accessories out of reach of
children under the age of 3 years.
• 1.5" super-bright LCD display
• 120+ hours of non-stop slideshow (w/ new batteries &
medium brightness setting)
• Requires 2AAA batteries (not included – use alkaline
batteries)
• Built-in memory for storage of up to 58 photos
• Multi-lingual on screen menu
• Power ON & OFF Timer
• Clock & date display Support PNG, TIFF, JPEG, GIF &
BMP picture formats
• Plug-n-Play operation
P.1
Rev. GBM-RGB-19/07 10 GT-21619-2
PREFACE
PRECAUTIONS
KEY FEATURES
BUTONS & INTERFACE
Control Key
On / Off / Menu /
1
Confirm
2
Forward
3
Backward
GETTING START
Remove the screw from battery compartment and
open the battery cover of Gingerbread man. Insert
two pieces of AAA batteries, and close and put the
screw back on the battery cover. Press
to power up the DPO.
To power off, simply follow the same step.
Press
the MENU MODE.
Press
functions in the menu.
Select a function and press
button to set the selected
function.
P.2
Rev. GBM-RGB-19/07 10 GT-21619-2
4
5
Battery Door Screw
6
USB Connector
1
for 2 secs
1
button again to display
2 3
to scroll through the
1
P.3
Need help?
Do you have a question about the HF-Z015GM and is the answer not in the manual?
Questions and answers