Aastra 6757i CT User Manual page 155

Using the Paging Key
The following procedure describes the use of the Paging key on the IP Phone. The procedure
assumes you have already configured the Paging key using the Aastra Web UI.
1. On the IP Phone, press the softkey or expansion module key you configured for
Paging (labeled as "Group 1" in the following illustration).
The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays
as follows.
2. Press the Drop key to end the multicast RTP session and return to the idle screen.
Model 6757i CT IP Phone User Guide
IP Phone UI
Notes:
1. Recipient of a Paging call can set a global "Do Not Disturb" (DND) to ignore
any incoming pages.
2. For incoming Paging, the phone uses the Intercom configuration settings. The
incoming Page is dependant on the "Allow Barge-In" parameter setting and the
"Idling/On Call" state.
Note:
If you enable global DND on the phone, the incoming multicast RTP session
is dropped.
Services
Icom
Dir
Callers
Tues Jan1 10:00am
Group 1
LAB
ACD
Paging
00:01
Drop
145