Specifications - Yamaha RX-V365 Service Manual

RX-V365/HTR-6230

■ SPECIFICATIONS

■ Audio Section
Minimum RMS Output Power (Power Amp. Section)
(1 kHz, 0.9 % THD)
FRONT L/R, CENTER, SURROUND L/R
U, C models (8 ohms) ......................................... 100 W/ch
R, T, K, A, B, G, E, F, L models (6 ohms) ............ 100 W/ch
Maximum Power (JEITA) (1 kHz, 10 % THD)
FRONT L/R, CENTER, SURROUND L/R
U, C models (8 ohms) .......................................... 135 W/ch
R, T, K, A, L models (6 ohms) .............................. 135 W/ch
Max. Power Per Channel [B, G, E, F models]
(1 kHz, 0.7 % THD, 4 ohms)
FRONT L/R, CENTER, SURROUND L/R .......105 W or more
IEC Power [B, G, E, F models]
(1 kHz, 0.1 % THD, 6 ohms)
MAIN L/R .........................................................90 W or more
Dynamic Power Per Channel (IHF) (FRONT L/R)
U, C models
(8/6/4/2 ohms) ..................................... 110/130/160/180 W
R, T, K, A, B, G, E, F, L models
(6/4/2 ohms) ............................................... 105/130/150 W
Dynamic Headroom
U, C models (8 ohms) ..............................................0.41 dB
Input Sensitivity/Input Impedance
CD, etc. ................................................ 200 mV / 47 k-ohms
MULTI CH INPUT
FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER
........................................................ 200 mV / 47 k-ohms
Maximum Input Signal (1 kHz, 0.5 % THD, Effect on)
CD, etc. ...........................................................2.0 V or more
Output Level/Output Impedance
AUDIO OUT (REC) .............................. 200 mV / 1.2 k-ohms
SUBWOOFER (2 ch STEREO and FRONT SP: Small)
................................................................. 4 V / 1.2 k-ohms
Headphone Jack Rated Output/Impedance
CD, etc. (1 kHz, 200 mV, 8 ohms) ......... 400 mV / 470 ohms
Frequency Response
(10 Hz to 100 kHz)
CD, etc. to FRONT L/R ......................................0 / -3.0 dB
(10 Hz to 20 kHz)
V-AUX to FRONT L/R .........................................0 / -3.0 dB
Total Harmonic Distortion (1 kHz, 50 W)
CD, etc. (2 ch STEREO) to FRONT L/R SP OUT
U, C models (8 ohms) ..................................0.06 % or less
R, T, K, A, B, G, E, F, L models (6 ohms) .......0.06 % or less
Signal to Noise Ratio (IHF-A Network)
CD, etc. (STEREO) (Input shorted) to SP OUT
200 mV ........................................................ 98 dB or more
250 mV ...................................................... 100 dB or more
Residual Noise (IHF-A Network)
FRONT L/R SP OUT ........................................170 μV or less
Channel Separation
CD, etc. (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz)
.......................................... 60 dB or more / 45 dB or more
10
Tone Control Characteristics
BASS
Boost/Cut .................................................±10 dB (100 Hz)
TREBLE
Boost/Cut .................................................±10 dB (20 kHz)
Filter Characteristics
FRONT, CENTER, SURROUND (H.P.F.)
........ fc=40/60/80/90/100/110/120/160/200 Hz, 12 dB/oct.
SUBWOOFER (L.P.F.)
........ fc=40/60/80/90/100/110/120/160/200 Hz, 24 dB/oct.
■ Video Section
Composite Video Signal Level
..................................................................1 Vp-p / 75 ohms
Component Signal Level
Y ................................................................1 Vp-p / 75 ohms
P /P ......................................................0.7 Vp-p / 75 ohms
B R
Video Maximum Input Level
................................................................... 1.5 Vp-p or more
Signal to Noise Ratio (IHF)
...................................................................... 50 dB or more
Monitor Out Frequency Response
Component video signal ...................5 Hz to 60 MHz, -3 dB
■ FM Section
Tuning Range
U, C models ............................................ 87.5 to 107.9 MHz
R, L models ................. 87.5 to 108.0 / 87.50 to 108.00 MHz
T, K, A, B, G, E, F models .................... 87.50 to 108.00 MHz
50 dB Quieting Sensitivity (IHF) (1 kHz, 100 % Mod.)
Mono ......................................................... 2.8 μV (20.2 dBf)
Signal to Noise Ratio (IHF)
Mono / Stereo ................................................. 73 dB / 70 dB
Harmonic Distortion (1 kHz)
Mono / Stereo .................................................. 0.5 % / 0.5 %
Antenna Input ..................................... 75 ohms unbalanced
■ AM Section
Tuning Range
U, C models .............................................. 530 to 1,710 kHz
R, L models ........................ 530 to 1,710 / 531 to 1,611 kHz
T, K, A, B, G, E, F models .......................... 531 to 1,611 kHz
Antenna Input ................................................. Loop antenna