Factory Preset; Clear Bluetooth Pairing Information - Yamaha RX-V365 Service Manual

Clear Bluetooth pairing information

While the Bluetooth DOCK is connected, initialization of the Bluetooth DOCK pairing information is inhibited/reserved.
Use "PRESET/TUNING<" and "PRESET TUNING>" keys for operation.
Initialization inhibited
Initialization reserved
12. NO MENU

13. FACTORY PRESET

This menu is used to reserve and inhibit initialization of the back-up IC.
The signals are processed using EFFECT OFF (The L/R signal is output using ANALOG BYPASS).
CAUTION: Before setting to the PRESET RESERVED, write down the existing preset memory content of the tuner in a
table as shown below.
(This is because setting to the PRESET RESERVED will cause the user memory content of the tuner to be
erased.)
Preset Group
A
B
C
D
E
Initialization inhibited
User memory initialization is not executed. Select this sub-menu to protect the user memory.
Initialization reserved
Initialization of the use memory is reserved. (Actually, initialization is executed the next time
that the power is turned on.)
Select this sub-menu to initialize the Bluetooth DOCK pairing information.
PRESET INHIBIT (Initialization inhibited)
Back-up IC initialization is not executed. Select this sub-menu to protect the values set by the user.
PRESET RESERVED (Initialization reserved)
Initialization of the back-up IC is reserved. (Actually, initialization is executed the next time that the
power is turned on.)
Select this sub-menu to reset to the original factory settings or to reset the IC.
Any protection history will be cleared.
P1 P2 P3 P4 P5 P6
RX-V365/HTR-6230
P7 P8
37