Operations - Windsor Titan T1 Operating Instructions Manual

Dry Pick Up
Dry Filter must be used during all dry pick up jobs to protect
vacuum motor(s) against dirt and debris. Routine cleaning
of filter will increase life of machine. Use of supplemental
paper filters will greatly reduce time spent cleaning Dry
Filter.
Wet Pick Up
Remove Dry Filter. Thoroughly empty dirt and debris from
tank. Securely fasten top on tank with latches. Machine is
ready for wet pick up using hose, extension wand(s) and/or
wet tools.
Hose Connection
Insert large end of hose into inlet on side of tank. Hose will
automatically lock in place. To release, press button on top
of inlet and remove hose.
Dry Pick Up Floor Tool
Use for dry pick up. Best when used on hard floors. Twist
floor tool clockwise onto extension wand until snug.
Wet Pick Up Floor Tool
For use on wet surfaces. Twist clockwise onto extension
wand until snug.
Extension Wands
The two extension wands can be used individually or fitted
together for "stand-up" floor cleaning. Slip one wand inside
other as far as it will go and twist together until indentations
on sides of wands line up.
Large Crevice Tool
Use for wet or dry pick up. For best fit, twist snugly onto
extension wand or hose.
Hose Adapter
For wet or dry use. Your machine is equipped with a 1.5"
diameter hose. Hose Adaptor enables machine to use
1.25" tools. Dusting tool included with machine must be
used with Hose Adapter,
Dusting Tool
For dusting dry surfaces. Twist onto Hose Adaptor or
Extension Wand(s).
OPERATING INSTRUCTIONS AND ACCESSORIES
T1 98648 03/27/00
AUTOMATIC SHUT OFF
Automatic shut off functions when tank has been filled with
liquid. As tank fills, float rises until it covers lower motor
filter. This shuts off vacuum suction when machine is full.
To continue use, turn off power switch and unplug power
cord. Remove top and empty tank.
5