Tenda D820R User Manual page 27

D820R ADSL2+ Router User Guide
ATM Interface: seven groups of
VPI/VCI provided by default: 0→
8/32, 1→8/35, 2→0/100, 3→8/81,
4→0/32, 5→0/35, and 6→0/81. If
your VPI/VCI is out of the
default range, select Interface 0
and enter the VPI/VCI value.
Operation Mode: Enable
Encapsulation: PPPOE LLC
Bridge: Disable
User Name and Password:
Enter them provided by your
ISP.
Use DHCP: Enabled
Default Route: Enabled
IP Address, Subnet Mask,
Gateway and DNS Server: Enter
these provided by your ISP.
Other fields select the default
value.
Click "Submit", and select
"Admin"> "Commit and Reboot"
tab. The right window will appear,
and click "Submit". Now your
settings have been saved in the
21