Tenda D820R User Manual page 20

D820R ADSL2+ Router User Guide
range, please configure the
parameters in the corresponding
field as below:
ATM Interface: 1
Encapsulation: 1483Bridged IP
LLC
VPI/VCI: Enter the VPI/VCI
value provided by your ISP.
Bridge: Enable
IGMP: Disable
Use DHCP: Enable
Default Route: Disabled
Other fields select the default
value.
Click "Submit", and select
"Admin">
"Commit and Reboot" tab. The
right window will appear, and
click "Submit". Now your
settings have been saved in the
Router. If you do not commit,
the settings will be lost before you
start the Router next time.
After the rebooting is completed,
you can launch the dial-up
14