Hardware Installation Procedures - Tenda D820R User Manual

 Have acquired at least one WAN IP address or user name and
password provided by your ISP
 One or more 10Base-T/100Base-T Network Adapter on your
PC
 Internet Explorer 5.0 or above

2.4.2 Hardware Installation Procedures

1. Connect the Modem port of the Voice Splitter with the D820R
ADSL2+ Router LINE port by telephone line. While you need
to use a telephone, please attach telephone line into the
PHONE port of the Voice Splitter.
2. Connect the ADSL2+ Router's LAN port to your computer's
network adapter with network cable.
3. Plug one end of the AC Power Adapter into the Power socket
on the Ethernet ADSL Router and the other end to a standard
electrical outlet, and turn on the power switch.
4. Check the line connection as the below figure to see if
everything is ready.
D820R ADSL2+ Router User Guide
7