Fisher & Paykel RB90S Installation Instructions And User Manual page 48

Before you call for service
46
Solving operating problems
Problem
Drawer skin not
sitting flush with
cabinetry.
Storage area too
warm or too cold.
Food freezing
when set to
Fridge mode.
Food freezing
when set to Chill
mode.
Ice buildup
inside freezer
compartment.
Possible causes
Drawer skin not fitted or
adjusted correctly.
Temperature setting not correct. Refer to Temperature adjustment section.
Frequent drawer openings.
Warm, humid weather.
Drawer not sealing or
closing properly.
Large amount of food
recently added.
The storage mode of the drawer
has recently been changed.
Temperature setting not correct. Refer to Temperature adjustment section.
Food placed directly in front of
air outlets.
Temperature setting not correct. Refer to Temperature adjustment section.
Items with high water content
may freeze.
Drawer not sealing correctly.
Frequent drawer openings.
High humidity environment.
What to do
Adjust drawer skin. Refer to Installation
instructions.
Minimise drawer openings to allow
temperature to stabilise.
Minimise drawer openings to allow
temperature to stabilise.
Move items around so drawer can
close tightly.
Check that seal is sitting flat and
sealing tightly.
Check that drawer skin is not clashing with
surrounding cabinetry.
Minimise drawer openings to allow
temperature to stabilise.
Wait for the storage mode icon on control
panel to stop flashing and recheck
temperature.
Move chill sensitive foods away from the
back wall of the appliance.
Select Fridge storage mode.
Move items around so drawer can
close tightly.
Check that drawer seal (gasket) is sitting
flat and sealing tightly.
Minimise drawer openings.
Not unusual during periods of high
humidity. Wipe out.