Before You Call For Service - Fisher & Paykel RB90S Installation Instructions And User Manual

Cooldrawer
Hide thumbs Also See for RB90S:
Table of Contents

Advertisement

Before you call for service

44
If there is a problem with your appliance, please check the following points before contacting
your local Fisher & Paykel Authorised Service Centre Dealer or Customer Care Centre.
Solving operating problems
Problem
Appliance does
not operate.
Interior light and/
or control panel
not working.
Motor operates
for long periods
Possible causes
No electricity at power outlet.
Power cord not attached at rear
of appliance.
No electricity at power outlet.
Sabbath mode may be
activated.
Light not functioning.
Key Lock mode may be
activated.
Note: This is normal. This appliance uses an energy efficient variable speed
compressor that saves energy by running for long periods of time on a low
speed. This is more energy efficient than the conventional on/off method.
What to do
Check that the plug is correctly connected
to outlet and that power is switched on.
Could the household supply be at fault?
Try plugging in another appliance at the
same outlet.
Has the appliance just been installed?
Check your installation instructions to
ensure the installer signed saying the
product was working after installation
then call an authorised service agent.
Check that appliance is connected to
power and power is switched on.
Press and hold the Lock and Mode Select
buttons together for 4 seconds, until
candle icon disappears.
The light cannot be serviced by the user.
Contact your Fisher & Paykel Dealer or
Authorised Service Agent.
Is the Lock light on? If so, press and hold
the Lock button for 3 seconds until the
Lock light goes out.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents