How To Operate - Recharge Mower G1-RM10 Safety & Operating Instructions Manual

Grass Catcher – Maintenance
In order to ensure proper non-restricted operation of your Recharge
Mower® you should empty the Grass Catcher regularly. This unit is
designed to cut grass ONLY with the Grass Catcher in place and or the
grass deflector. Once you have dismounted the unit and ensure that the
blades have come to a complete stop, remove and empty the Grass
Catcher or remove the grass deflector . With the grass catcher unit
removed or grass deflector – always check to ensure that the Chute is
clear before returning the grass catcher/grass deflector into place.
Fig 1.8

How to Operate:

REVIEW THIS CAREFULLY TO ENSURE SAFE AND LASTING OPERATION
Please ensure that the mower has been fully charged before beginning. That
involves connecting the specially designed end to the connector on the steering wheel
section Fig 1.3 . This is designed to fit in only one position. Then plug the other end
into a standard 110v wall outlet. Full charge is usually achieved overnight. The
charger will automatically shut off and the indicator will turn GREEN when the
unit I fully charged.
1. Always follow the safety rules.
2. To prepare for use-adjust the cutting height by shifting the blade adjustment
arm either up or down until desired height is achieved. Fig 1.6.
3. Ensure that the parking brake is applied by pulling up to the top Fig 1.6.
4. Install the rear grass catcher making certain that both the upper connections
and the bottom corner catchers are in place fully, or install the grass
deflector again making certain that both the upper connections and the
bottom corner catchers are in place fully.
Grass removal unit- Always use the
safety grass removal unit when clearing
the chute
19