Recharge Mower G1-RM10 Safety & Operating Instructions Manual page 21

9. Turn the key to the right – you will see the display screen become active
indicating your charge level.
10. To begin – you MUST release the hand brake, and or foot brake.
11. Engage the cutting blades by depressing the yellow safety button and then
squeezing the LEFT handle. Doing this will cause the blades to immediately
begin to operate.
12. Release the handle and the blades will come to a stop.
13. To proceed forward – press the switch on the top of the steering wheel to the
forward position.
14. Release the handle and the blades will come to a stop.
15. To proceed forward- press the switch on the top of the steering wheel to the
forward position Fig 1.14.
16. When you squeeze the right handle – the unit will then begin to move.
17. NOTE: ROTATE the speed control dial to slow or speed your movement. Small
adjusts will change the momentum of the unit.
Operator Presence Switch
Fig 1.13
Switch
Fig 1.14
Speed control
Fig 1.15
21