Replacing Headlight Bulb; Checking Tire Pressure - Recharge Mower G1-RM10 Safety & Operating Instructions Manual

Headlight
Fig 1.4

Replacing Headlight Bulb

1. Ensure machine is off.
2. Park machine safely by applying hand break.
3. Reach under machine just behind headlight.
4. Locate light bulb socket.
5. Turn bulb socket ¼ turn counterclockwise to remove.
6. Replace defective bulb with a new bulb.
7. Insert bulb socket into housing, and turn clockwise to install.
TIRES
WARNING: Never exceed the maximum inflation
pressure shown on the sidewall of tire.

Checking Tire Pressure

1. Always check tires for damage.
2. Check tire pressure with proper tool.
The recommended operating tire pressure is:
 Approximately 20 psi for the tire inflation.
Headlight-
ON/OFF switch
16
Fig 1.5