Recharge Mower G1-RM10 Safety & Operating Instructions Manual page 12

SEAT-Remove all packaging
 Carefully remove the left cotter pin. While sliding the seat bar out-ENSURE you
collect the washers that will be installed.
 Have your assistant position the seat. |The front of the seat should be positioned
over the metal bars protruding from the base.
 Ensure 1 (one) washer is on the bar and to the far right. The cotter pin will keep it
from falling off.
 Insert the seat bar through the base of the seat AND then the bar protruding
through the frame-you will need the larger washer.
Washer
Grass Catcher- Remove all packaging
Carefully open bag
Position bars to position holders
Place plates over rod and tighten screws supplied
12