GE Profile Harmony WPGT9360 Technical Service Manual page 43

d. Use the BACK pad on the keypanel
membrane to scroll back through the list.
If MORE is not displayed, then there are no
additional errors.
5. If errors have been recorded, the following steps
MUST be performed.
a. Make a note of the listed errors. Press EXIT,
the screen prompts you to unplug the
washer before servicing.
SERVICE MODE DIAGNOSTICS
ATTENTION
IN ORDER TO EXIT THE SERVICE MODE
THE UNIT MUST BE UNPLUGGED AND
SERVICED. THE UNIT WILL
AUTOMATICALLY RUN A SETUP POUTINE
AND SELF-DIAGNOSTICS UPON BEING
PLUGGED BACK IN.
IMPORTANT: You must press EXIT and unplug the
washing machine to clear all error messages and
to activate the setup mode program. Pressing EXIT
without unplugging the washing machine will not
clear the error codes.
b. Disconnect power and make necessary
repairs.
c. After the problem has been identifi ed in
service mode and repairs have been made,
the unit prompts the service technician
to run a setup/self diagnostic check. The
self diagnostic check consists of a series
of system tests to ensure the washer is
operating correctly. Follow the on-screen
instructions.
CONGRATULATIONS ON THE
PURCHASE OF YOUR NEW GE
PROFILE WASHER!
A BRIEF SELF DIAGNOSTIC
WILL NOW BE RUN ON YOUR
WASHER. THIS MAY TAKE UP
TO 5 MINUTES
OK
List of self diagnostic checks:
• Lid
• Touch Screen
• Beeper
• Keypanel Buttons
• Sensors
• Water System
• Drive System
• Serial Communication Link
d. When all errors have been corrected
and the setup/self diagnostic mode has
been completed, the washer displays the
following screen.
YOUR WASHER IS NOW
READY FOR YOUR USE.
PLEASE READ YOUR
USER'S MANUAL PRIOR
TO OPERATION.
e. Press OK to return the washer to normal
operation.
IMPORTANT: Always disconnect power, reconnect
power, and run the setup/self diagnostic mode
prior to leaving the house. If this process is not
completed and a power outage should occur,
the setup/self diagnostic mode screen will be
displayed for the customer. This may generate a
second service call when no problem exists.
– 43 –
OK