Wash Basket - GE Profile Harmony WPGT9360 Technical Service Manual

Wash Basket

Caution: If the basket is not free to rotate, damage
to the clutch coupler can occur. Ensure that the
washer is in the spin mode before removing the
wash basket. The wash basket will rotate freely
when it is in spin mode. Do not attempt to remove
the hub nut if the basket is not free to rotate.
To remove the wash basket:
1. Remove the
Top Cover
2. Remove the 8 Phillips-head screws that hold the
outer tub cover in place.
3. Place a fl at-head screwdriver in the slot under
the infusor cap and gently pry off.
Infusor Cap
Infusor
.
4. Remove the 10-mm hex-head screw that holds
the infusor in place. Use a socket or Phillips head
screwdriver. (Turn the screw counterclockwise to
remove.)
Note: The 10-mm screw has a rubber O-ring.
5. Pull the infusor up and out.
WARNING: The inner edge can be sharp. Wear
Kevlar gloves or equivalent protection.
6. Remove the 37.5-mm (1-
hub-nut with a socket or Crescent wrench
(rotate hub-nut counterclockwise to remove).
Hub Nut
7. Lift the wash basket up and out.
– 30 –
/ " SAE equivalent)
1
2