Specifications - Pride Mobility JET 3 Owner's Manual

SPECIFICATIONS

Class of Use:
Maximum Safe Slope:
Maximum Climbing Ability:
Maximum Obstacle Climbing Ability:
Drive Wheels:
Caster Wheels:
Anti-tip Wheels:
Maximum Speed:
Brakes:
Ground Clearance:
Turning Radius:
Overall Size:
Seating Options:
Drivetrain:
Batteries:
Range:
Battery Charger:
Motor Controller:
Weight Capacity:
Jet 3 Weights:
Warranties:
Tools Required for Service
Your power chair is delivered fully assembled. The seat and batteries can be removed without tools. However, to make
adjustments or to service your power chair, you should have access to the following tools:
l
set of hex keys or hex bits (SAE and Metric).
l
drive socket set (SAE and Metric).
l
adjustable spanner.
l
spanner set (SAE and Metric).
l
set of screwdrivers.
6
A
8.7%
8.7%
5 cm
25 cm, center-mounted, solid tyres (pneumatic tyres are optional)
20 cm, solid, rear articulating
15 cm, solid, front mounted
Up to 6 km/h
Electronic, regenerative, "Intelligent Braking"
7.6 cm (3 in.)
47 cm 18.5 in.)
Length: 90 cm (34.5 in.)
Width: 58 cm (23 in.)
High back with headrest
Two-motor, rear-wheel
Two 12-volt, U-1 32 AH batteries
Up to 40 km
Onboard (standard)
Off-board (optional)
P&G VSI (standard)
P&G Pilot (optional)
113 kg (250 lb./22 Stone)
Base: 43 kg (95 lbs.)
Seat: 17 kg (36.5 lbs.)
Batteries: 11 kg (24.5 lbs.) each
Five-year limited warranty on frame
Two-year warranty on drivetrain
One-year warranty on electronics
www.pridemobility.com
JET 3 SPECIFICATIONS
UK Jet 3/Rev B/Dec02