Emergency Run Operation - Mitsubishi Daiya SRK20HB User Manual

AIRFLOW DIRECTION ADJUSTMENT PROCEDURE
MEMORY FLAP (FLAP STOPPED)
When you press the AIRFLOW button once while the flap is operating, it stops swinging at an
angle.Since this angle is memorized in the micro-computer, the flap will automatically be set at this
angle when the next operation is started.
• Recommended angle of the flap when stopping
HEAT
•
Avoid constant airflow to the body for hours on end.
• Avoid downward blowing operation for hours on end.
• Do not try to adjust the flaps by hand, as the control angle may change or the
flap may not close properly.

Emergency run operation

• The ON/OFF button on the unit operates ON/OFF temporarily when the remote control is not used.
Operation program
• OPERATION MODE : AUTO
• FAN SPEED
• AIR FLOW
• Operation starts by pressing the ON/OFF button; it stops if you press the button again.
ON/OFF
(Slant forward
COOL, DRY
blowing)
DANGER
CAUTION
: AUTO
: AUTO
Unit ON/OFF button
Adjusting left/right air flow direction
Adjust the direction by moving the left/right air
flow fin by hand.
(Horizontal
blowing)
– 10 –
CAUTION
Please stop the air conditioner when
adjusting the air flow direction.