Select Cycle - Maytag W10368555A Use And Care Manual

7.

Select cycle

Turn cycle knob to choose your wash
cycle. Estimated Time Remaining
will light up with a cycle time. You may
notice time adjusting during the cycle.
This is normal.
If you do not want to begin a cycle
immediately, you may choose DELAY START option.
To choose a delay time:
1. Press POWER/CANCEL.
2. Select the desired Cycle, Modifiers, and Options. Delay Start
not valid for Drain & Spin cycle.
3. Press + (plus) DELAY START. 1H (one hour) will be displayed
in the time display window. The indicator light for Delay will
glow.
4. For a longer delay time, press DELAY START + (plus). For a
shorter delay time, press DELAY START – (minus). The Start
Time will increase or decrease by 1-hour steps.
5. Press START/PAUSE. The countdown in hours and minutes
to the wash cycle will show in the time display window and
the indicator light will begin to flash.
NOTE: The Start/Pause indicator light will not flash when
Delay Start is chosen. You must press START/PAUSE
to initiate a countdown for the cycle to begin. The cycle
selections and modifiers are lit during the Delay Start time.
To cancel delaying a cycle:
Press POWER/CANCEL once to cancel Delay Start or press
START/PAUSE to cancel the countdown and start the cycle.
IMPORTANT: When delaying a cycle, use liquid HE detergent
only in the dispenser. Powdered detergents may absorb
moisture from a previous cycle and clump before the wash
cycle begins.
10
8.
Select cycle modifiers
Once you select a cycle, the default settings for that cycle will
be lit. Press the Modifier buttons to change the Soil Level, Spin
Speed, and Wash/Rinse Temperature, if desired. Not all settings
are available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added, so
this may be cooler than what your
previous washer provided.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Tap Cold
This is the temperature from your
faucet.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Dark colors that
bleed or fade
Light soils
Cold water
temperatures are used
to maintain colors and
avoid transferring of
dyes.