Related Manuals for King Canada 8260FSN-2
Summary of Contents for King Canada 8260FSN-2
-
Page 1: Instruction Manual
2 IN 1- 2” FLOORING STAPLER/ CLEAT NAILER KIT performance performance plus plus MODEL: 8260FSN-2 INSTRUCTION MANUAL COPYRIGHT © 2007 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. -
Page 2: Warranty Information
LIMITED TOOL WARRANTY King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in materials. -
Page 3: Specifications
Staple/Cleat Nail driving 1/4” and 5/16” mallet Non-marring bases SPECIFICATIONS Model ....................................8260FSN-2 Air inlet ......................................1/4” NPT Compressed air: Maximum permissible operating pressure ........................120 PSIG (8.3 bar) Recommended operating pressure range ..........................60-100 PSI Operating pressure for peak performance ..........................100 PSI Staple range ........................15-1/2ga. x 1/2” crown staples from 1” to 2”... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS • Read and understand this manual and all the safety instructions before operating this flooring stapler/nailer. If you have any questions, please contact our authorized service centres or retailers for help. • Never allow the use of flammable gases as a power source for the flooring stapler/nailer. Use filtered, lubricated and regulated compressed air only. -
Page 5: Lubrication And Maintenance
LUBRICATION AIR SUPPLY AND CONNECTIONS LUBRICATION AND MAINTENANCE • Your flooring stapler/nailer needs to be lubicated before and after the first time you use it. • Disconnect the air supply from the flooring stapler/nailer before lubricating. • Turn the flooring stapler/nailer so that the inlet is facing up and put ONE DROP of high speed spindle oil or oil without detergent into the air inlet. -
Page 6: Clearing Jams
LOADING FLOORING STAPLER/NAILER & CLEARING JAMS LOADING FLOORING STAPLER/NAILER MAGAZINE • Disconnect the air hose from the flooring stapler/nailer air inlet. • Pull all the way back on the magazine sliding cover until it latches. • Place a stick of 1/2” crown staples over the hanging rail of the magazine so that the legs of the staples straddle or a stick of cleat nails against either side of the hanging rail of the magazine. - Page 7 OPERATING YOUR FLOORING STAPLER/NAILER OPERATING YOUR FLOORING STAPLER/NAILER WARNING! protect your eyes and ears. Wear Z87 safety glasses with side shields. Wear hearing protection. Employers are responsible for ensuring the user or anyone near the flooring stapler/nailer wears the above mentioned safety protection. WARNING! Check and replace any damaged or worn components.
-
Page 8: Maintenance And Troubleshooting
Replacement Accessory Kit (model: KW-097) is available for your flooring stapler/nailer. Contact your local King Canada distributor for more information. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.