Related Manuals for King Canada 8235GFN
Summary of Contents for King Canada 8235GFN
-
Page 1: Instruction Manual
34º CLIPPED HEAD CORDLESS GAS FRAMING NAILER performance performance plus plus MODEL: 8235GFN INSTRUCTION MANUAL COPYRIGHT © 2009 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. -
Page 2: Warranty Information
LIMITED TOOL WARRANTY King Canada makes every effort to ensure that this product meets high quality and durability standards. King Canada warrants to the original retail consumer a 2-year limited warranty as of the date the product was purchased at retail and that each product is free from defects in materials. - Page 3 GENERAL & SPECIFIC SAFETY INSTRUCTIONS 1. KNOW YOUR TOOL 7. ALWAYS WEAR SAFETY GLASSES. Read and understand the owners manual and labels affixed to the Always wear safety glasses (ANSI Z87.1). Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses. tool.
- Page 4 SPECIFIC SAFETY INSTRUCTIONS FOR CORDLESS GAS FRAMING NAILER 6. USE OUTSIDE OR IN WELL-VENTILATED AREAS. 16. NEVER MODIFY OR ALTER THIS NAILER. This nailer exhausts carbon monoxide which is a danger to health Doing so may cause it to malfuction and personal injuries may when inhaled.
-
Page 5: Getting To Know Your Tool
15. Battery charger pilot light (green=charged, red=charging) 8. Paper collated nail strip insertion area 16. Battery charger SPECIFICATIONS 34º Cordless Gas Framing Nailer Model ......................................8235GFN Nail degree range ..............................30 paper collated Nail length range ............................2” to 3-1/2” clipped head nails Nail diameter range................................0.113” to 0.131”... - Page 6 PREPARING NAILER BEFORE USE CHARGING BATTERY BEFORE INITIAL USE Warning! Do not charge battery using a higher voltage than indicated on the charger nameplate or else the charger will burn up. If charger power cord is damaged, have it replaced before attempting to charge battery.
- Page 7 PREPARING NAILER BEFORE USE PREPARING THE FUEL CELL (sold separately) Warning! Read SPECIFIC SAFETY INSTRUCTIONS FOR FUEL CELLS before proceeding with fuel cell installation. Recommended fuel cells: Paslode mod. 816000, 816050 and Senco mod. PC1192. Paslode is a registered trademark of Illinois Tool Works Co, Ltd. Senco is a registered trademark of Senco Products Inc. DANGER! - The fuel cells are flammable.
- Page 8 TESTING & PREPARING NAILER BEFORE USE TESTING NAILER BEFORE LOADING FRAMING NAILS WARNING! Before actually beginning the nailing work, test the nailer by using the instructions below. Conduct the tests in the following order. If abnormal operation occurs, stop using the nailer and contact an authorized service centre immediately.
-
Page 9: Operation
OPERATION Read and understand tool labels and all of the operating instructions, safety and warnings in this manual before operating or maintaining this nailer. Failure to follow warning could result in death or serious injury. This nailer is powered by internal combustion device (fuel cell). This nailer shall only be used with fuel cells which are listed in this instruction manual. -
Page 10: Operation And Maintenance
OPERATION & MAINTENANCE CLEARING JAMMED NAIL If nails are jammed in the firing head, open nailer and remove jammed nail in the following order. 1. Remove the fuel cell (A) Fig.10 and the battery (B) from the nailer. 2. Remove paper collated nail strip from the nailer magazine. 3. -
Page 11: Troubleshooting
Check the electrical cord. Unable to charge battery. Remove the battery and reinstall it. Other control malfuction. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list.