Table of Contents
Advertisement
4. After the Massage has been Completed the Unit will Automatically Stop.
After the designated program has been completed the massage lounger will automatically stop.
(Approximately 15 minutes.)
Stopping the Massage during a Program
• Press
again.
• The legrest will automatically be lowered and the massage heads will return to the retracted position.
After the massage heads have stopped moving the backrest will return to the original position.
Stopping the Massage Immediately
• Press
if you want to stop the massage immediately.
• All movement will immediately stop.
• Please press
twice in order to return the massage heads to the retracted position.
* After the program has been completed the voice navigation will provide information regarding user program functions and
will flash.
Adjusting the Strength of the Back Massage
Please press
to adjust massage strength.
Adjusting the Strength of the Leg/Calf Massage
Please press
to adjust massage strength.
Turning off Vibration
Please press
to stop the vibration in the desired area. Press it again to restart it.
(EP3203 only.)
Body Searching — Adjusting Shoulder Position
The massage rollers will rise up the back until
they reach the area behind the neck, after
which they will descend to the level of the
shoulders where soft tapping will be carried
out for approximately 10 seconds.
Soft Tapping
• When there is nobody sitting in the seat or when body searching has not been carried out successfully, "massage
terminated" will be announced and the soft tapping will stop. If this happens then please sit as far back as possible with
your head on the pillow (back cushion/backrest) and push
• When someone else wishes to use the massage lounger midway through a massage, please push
massage and start from the beginning again as the shoulder position will vary from person to person.
12
3-Stage
Adjustment
* When the strength is set to 0 (i.e. no bars are lit on the display)
the leg/calf air massage will stop and change to the back
massage only.
Use the Neck Roller Position Adjustment button
to properly set the shoulder position while soft
tapping is being carried out.
Up
Down
Too High
Correct Position
Pressing one of the buttons
once will raise or lower the
Too Low
massage heads by approxi-
mately 11/16" (1.8cm).
to carry out body searching again.
to stop the
Additional Information
Display of Massage Areas
Sometimes the massage areas displayed on the control panel will be different from what
you are actually experiencing.
* Due to limitations in the size of the display, the massage areas displayed on the control
panel are only a general indication of the area being massaged. This means that sometimes
the areas that are actually being massaged are different from those shown on the display.
Areas of massage displayed may change depending on changes to massage intensity or
position of massage heads.
Pressure Level Display
The pressure being applied to the body is shown on the display.
• The actual pressure experienced may vary from the level indicated on the display.
• Depending on the seatback fabric, the pressure level indicated may change even when nobody is sitting in the seat.
Pressure Feedback Function
The strength of the massage (pressure level) is automatically adjusted if it is too much or too little.
• The standard body pressure level varies according to the strength of the program selected.
Programmed Operation
• Please see Page 25 for details regard the lower body massage.
• The movements below are shown in simplified form for the sake of illustration.
Shiatsu Program
Shiatsu C and
Tap A and Roll
Shiatsu A,
Shiatsu A,
Shiatsu A
Shiatsu C and
Shiatsu B and
Tap A
Knead A
Deep Program
Shiatsu A and
Swedish and Roll
Knead A and
Knead A and
Knead B
Knead B
Tap B
Gentle Program
Knead B and
Knead B and
Knead B and Roll
Swedish, Knead B
Swedish
Tap A
and Tap B
Refresh Program
Shiatsu A and
Tap A and Roll
Knead B, Tap A
Knead A, Tap B,
Knead B
and Shiatsu A
Roll and Tap B
Knead B and Roll
Shiatsu C,
Knead A and
Shiatsu B, Tap A
Shiatsu A and
Tap B
and Knead B
Knead B
Knead B and Roll
Shiatsu A and
Knead A and
Knead B and
Knead B
Tap B
Shiatsu B
Knead A, Tap B
Tap B, Swedish
Knead B, Knead A
Knead A, Knead B,
and Knead B
and Knead B
and Tap B
Swedish and
Tap B
Knead A and
Knead B, Tap B
Knead B
Tap C, Roll,
Tap A
and Tap C
Tap B and Roll
Tap B, Knead B
and Roll
Swedish, Roll
and Tap B
Swedish, Roll
and Tap B
Swedish and Roll
13
Hide quick links:
Advertisement
Table of Contents
