Panasonic EP3203 Operating Instructions Manual page 5

Attaching the Armrests
1. Insert the armrests into 2. Push the armrest
the seat. forward until it clicks
into position.
• Marks indicating left and right can
be found on the underside of each
armrest.
Align the o
marks.
Attaching the Control Panel Stand
Secure the control panel stand to the right hand side of the unit using the three
screws provided.
Attaching and Removing the Control Panel
When attaching the
control panel, slide
it in from the top.
Control
Panel Stand
Clip
6
3. Insert the attachment
screw into the hole and use
the Allen key to secure it.
(Repeat the procedure for the armrest
on the other side.)
Slide the armrest
forward until the p
aligns with the A.
Turn the screw
clockwise to
tighten it.
Allen Key (provided)
Slide the control panel
up to remove it.
• Loosen the screw to situate the
control panel stand at the
desired angle, then tighten
screw again. For smooth
removal of the control
Screw
panel, press on the back
of the unit while sliding up.
Adjusting the Control Panel Stand
1. The control panel stand can rotate
forward and back.
Return the Backrest to the Upright Position
1. Plug the power plug into the power
outlet.
2. Turn the lock switch to the "Open"
position.
3. Turn on the power switch on the back
of the unit.
4. Push Twice (See Page 10)
• The backrest will return to the upright position
automatically.
• The massage heads will move to the retracted position.
Attaching the Pillow
Attach the pillow using the fasteners
on the pillow and on the top of the
backrest.
2. The angle can also be adjusted.
1
3
2
7