Specifications; Hdfx100 - Sony HDTX100 User Manual

2
When the remover can no longer be turned, pull it out
straight.
Note
The alignment sleeve can be removed and installed
again while attached to the tip of the alignment sleeve
remover. Take care not to lose or damage the
alignment sleeve.
(Alignment sleeve part number: 9-980-074-01)
3
Clean the optical contact tips (white) using a cotton
swab moistened with alcohol.
4
Reinsert the alignment sleeve remover with the
attached alignment sleeve into the connector and push
it in until you hear a click.
5
Rotate the alignment sleeve remover
counterclockwise to fasten the alignment sleeve. Then
pull out the alignment sleeve remover.

Specifications

HDFX100

General
Power supply 100 to 240 V AC, 50/60 Hz
Current consumption
3 A max.
Peak inrush current
(1) Power ON, current probe method:
35 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
16 A (230 V)
Operating temperature
+5 °C to +40 °C (+41 °F to +104 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Mass approx. 5.5 kg (12 lb. 2 oz.)
Dimensional drawing (unit: mm/inches)
3
145 / 5
/
4
25
Specifications