STEP 6 REMOVE THE TOEKICK
If, after removing the freezer drawers and
refrigerator door, the refrigerator will still
not fit through a doorway, the toekick
can be removed.
• Remove the toekick by removing the 2 Phillips
head screws.
STEP 7 MOVE THE REFRIGERATOR
• Place a piece of the carton or soft cloth against
the side panel of the refrigerator to pad and protect
the stainless steel finish.
• Place the refrigerator on the handtruck with a side
against the truck only.
• Move the refrigerator indoors. Place refrigerator close
to the installation location.
STEP 8 REPLACE THE FREEZER
DRAWERS
Two people may be required to complete
this procedure.
TOP DRAWER
ATTACH AND SECURE THE DRAWER FRONT
TO THE SLIDES
Pull out the rail assemblies to the full length
A.
on each side of the cabinet.
Installation Instructions
9
STEP 8 REPLACE THE FREEZER
DRAWERS (CONT.)
Drive the bottom outside screw into the door
B.
on each side until it is all the way in.
Screw
Drive the remaining 3 screws on each side
C.
all the way into place (there are a total
of 8 hex-head screws).
Screws
REPLACE THE FREEZER BASKET
Replace the top drawer freezer basket.