Operation; Switching On; Starting A Programme - Miele G 7804 Operating Instructions Manual

Switching on

^ Close the door.
^ Open the stopcocks (if turned off).
^ Press the I-0 button.
When the programme selector is at the
STOP position f a point lights up in the
display.

Starting a programme

Choose your programme according to
the type of instruments or utensils being
cleaned, and the degree of soiling.
The different programmes and their
uses are described in the Programme
Chart at the end of this booklet.
^ Turn the programme selector
clockwise or anti-clockwise to the
required programme.
The temperature of the first rinse of
the programme selected is shown in
the display, except with PRE-RINSE
D and DRAIN 6.
The indicator light next to the Start
button 6 flashes.
^ Select additional function DRYING
3 if required (see "Selecting an
additional function").
^ Press the Start button 6. The actual
temperature will appear in the
display.
The indicator light next to the Start
button lights up constantly.
Once the programme has started all
other programmes are blocked. If the
programme selector is then turned to
another programme, the values shown
in the display go out. The values can be
seen again if the programme selector is
turned back to the position of the
programme currently in operation.
^ To alternate between elapsed time
and actual time in the display during
the programme, press the 4 button.

Operation

31