Adding Neutralising Agent (Optional) - Miele G 7804 Operating Instructions Manual

As a chargeable optional extra this
machine can also be fitted with a
"dispenser pump for liquid cleaning
agent" (DOS-Module G 10). This is
connected externally.
The optional DOS Module is supplied
with its own installation and connection
instructions.
The DOS module has to be
connected and the dosage
concentration and amount set by a
Miele service technician.
The relevent programme (see
"Programme Chart" - DOS 3) can not be
started until the dispensing system has
been vented.
^ Place the red container with
neutralising agent on the floor next to
the machine or in an adjoining
cupboard.
When the "Add neutralising agent"
indicator light won the control panel
lights up:

Adding neutralising agent (optional)

^ Fill the container (red) with
neutralising agent, or change it for a
new container, and then:
^ Insert the siphon tube into the
container (observe the colour code).
Please remember to fill the container
in good time, it should not be
allowed to empty completely.
23