Ip Source Binding Commands - ZyXEL Communications Ethernet Switch Cli Reference Manual

C
HA P T E R

IP Source Binding Commands

Use these commands to manage the bindings table for IP source guard.
32.1 Command Summary
The following section lists the commands for this feature.
Table 80 ip source binding Command Summary
COMMAND
show ip source binding [<mac-
addr>] [...]
show ip source binding help
ip source binding arp-freeze
ip source binding arp-freeze
interface port-channel <port-
list>
ip source binding arp-freeze
vlan <vlan-list>
ip source binding <mac-addr>
vlan <vlan-id> <ip> [interface
port-channel <interface-id>]
no ip source binding <mac-addr>
vlan <vlan-id>
32.2 Command Examples
This example shows the current binding table.
sysname# show ip source binding
MacAddress
-----------------
Total number of bindings: 0
Ethernet Switch CLI Reference Guide
DESCRIPTION
Displays the bindings configured on the Switch, optionally
based on the specified parameters.
Provides more information about the specified command.
Create static bindings from any previously learned ARP
entries in the Switch's ARP table and add them in the IP
source guard static binding table.
Create static bindings from previously learned ARP entries
containing the specified port number and add them in the IP
source guard static binding table.
Create static bindings from previously learned ARP entries
containing the specified VLAN ID and add them in the IP
source guard static binding table.
Creates a static binding for ARP inspection.
Removes the specified static binding.
IpAddress
--------------- ------------
32
Lease Type VLAN
-------------
M P
E 3
E 3
C 13
C 13
C 13
C 13
C 13
Port
---- ---
137