Gvrp Commands - ZyXEL Communications Ethernet Switch Cli Reference Manual

C
HA P T E R
Use these commands to configure GVRP.
23.1 Command Summary
The following section lists the commands for this feature.
Table 60 gvrp Command Summary
COMMAND
show vlan1q gvrp
vlan1q gvrp
no vlan1q gvrp
interface port-channel <port-
list>
gvrp
no gvrp
23.2 Command Examples
This example shows the Switch's GVRP settings.
sysname# show vlan1q gvrp
GVRP Support
-----------------------
gvrpEnable = YES
gvrpPortEnable:
This example turns off GVRP on ports 1-5.
sysname# configure
sysname(config)# interface port-channel 1-5
sysname(config-interface)# no gvrp
sysname(config-interface)# exit
sysname(config)# exit
Ethernet Switch CLI Reference Guide

GVRP Commands

DESCRIPTION
Displays GVRP settings.
Enables GVRP.
Disables GVRP on the Switch.
Enters config-interface mode for the specified port(s).
Enables this function to permit VLAN groups beyond the local
Switch.
Disable GVRP on the port(s).
23
M P
E 13
C 13
C 13
C 13
C 13
C 13
99